SR-20RIV TYPE A
Information
The SR-20RIV Type A provides exceptional performance and versatility within the 20mm class. Up to forty one tools can be mounted including six tools on the manual B axis tool post.
The flexibility of the SR-20RIV Type A is further enhanced by its ability to switch between guide bush mode (Swiss type) and non-guide bush mode.
The powerful sub-spindle with independent 8 station platen increases overlapped machining possibilities. The Y2 axis on the sub-spindle platen allows both cross working and front facing power tools to be mounted in any station.
WORKPIECE |
||
|---|---|---|
| DIAMETER |  |
20mm / 22.2mm (OPT) |
| LENGTH |  |
205mm / 50mm |
| GEOMETRY |  |
|
| C AXIS |  |
MAIN + SUB SPINDLE |
Benefits
- Standard machining diameter 20mm (22.2mm optional)
- Z1 Stroke of 205mm in Swiss mode (Guide Bush)
- Switchable between guide bush and non-guide bush modes
- Main spindle speed 10,000 rpm, sub-spindle speed 10,000 rpm
- Built-in type main and sub-spindle motors for improved indexing accuracy
- Manual B axis for angular machining on both spindles
- 8 Station sub-spindle platen for maximum overlapping
- Two independent deep hole drilling stations (main spindle)
Specification
| MAIN SPINDLE SIDE | |
|---|---|
| Number of axes | 8 |
| Main spindle (headstock) | Z1 / C1 axis |
| Main spindle power | X1 / Y1 axis |
| Max. machining diameter | 20 mm / 22.2 mm (OPTION) |
| Headstock stroke (Swiss type / NGB mode) | 205 MM / 50 MM |
| Main spindle power | 3.7 kW |
| Max spindle speed | 10,000 rpm |
| Main spindle tooling | |
| Turning tool | 7 tools (Ø 12 mm) |
| DRILLING ARM SLEEVE HOLDER CAPACITY | 4 x Ø 22 MM SLEEVES (ER16) |
| POWER DRIVEN TOOL (PDT) POSITIONS | 3 + 3 (B AXIS) + 2 MODULAR STATIONS |
| MAX (PDT) SPEED | 8,000 rpm |
| KINEMATIC DIAGRAM |
|---|
 |
| SUB SPINDLE SIDE | |
|---|---|
| Sub spindle | X2 / Z2 / C2 axis |
| Max. chucking diameter | 20 mm / 22.2 mm (option) |
| Sub spindle power | 3.7 kW |
| Sub spindle speed | 10,000 rpm |
| Sub spindle tooling | |
| BACK-WORKING PLATEN POSITIONS | 8 |
| MAX DRILL SLEEVE CAPACITY | ER16 |
| POWER DRIVEN TOOL (PDT) POSITIONS | 8 (ER16) |
| MAX (PDT) SPEED | 8,000 RPM |
| FMB | BAR FEED DIMENSION A (MM) | ||
|---|---|---|---|
| Micromag 08-20 | 3415 (1.6M) | 5015 (3.2M) | 6015 (4.2M) |
| Minimag 2-20 | 3415 (1.6M) | 5015 (3.2M) | 6015 (4.2M) |
| Turbo 2-20 | 3215 (2.2M) | 4215 (3.2M) | 5215 (4.2M) |
| Turbo 3-36 | 3320 (2.2M) | 4320 (3.2M) | 5320 (4.2M) |
Video Demonstration
More information
